![background image](http://html.mh-extra.com/html/omron/xpectia-fz3/xpectia-fz3_user-manual_1633321097.webp)
2
Measurement
FZ3 Processing Items List Manual
Shape
95
Settings Flow (Shape )
Set up shape according to the following steps.
List of Shape Items
Item name
Description
Model
register
This item registers the pattern characteristic of the measurement image as a model.
Model parameter values can be changed as needed to address unstable measurement results or to
increase the processing speed.Normally, the factory default value will be used.
Reference:
Model Registration (Shape ) (p.95)
Region
setting
This item is used to set up the measurement area.
Restricting the range enables accurate measurement in a short period of time.
Reference:
Region Setting (Shape ) (p.97)
Detection
point
This item can be changed if necessary.Specify a position in the model that should be used as the
detection coordinates during measurement.Usually, the central position of the set model is
registered as the detection coordinates.
Reference:
Detection Point (Shape ) (p.97)
Ref. position
This item can be changed if necessary.Usually, the central position of the registered region is
registered as the reference position.
Reference:
Reference Position (Shape ) (p.98)
Measurement
This item specifies the judgement condition for measurement results.Specify the correlation value,
sort condition, and label number.
Measurement parameter can be changed as needed to address unstable measurement results or to
increase the processing speed.Normally, the factory default value will be used.
Reference:
Measurement Parameters (Shape ) (p.99)
Output
parameter
This item can be changed if necessary.Normally, the factory default value may be used.
Use the output parameter to specify how to handle the coordinates.
Reference:
Output Parameters (Shape ) (p.100)
Model Registration (Shape )
Register the parts to measure as the model.
The position at the time of registration is also registered in the model information.Place the
measurement object in the correct position when registering a model.
1.
In the Item Tab area, tap [Model register].
When setting a new model, you do not have to tap [Model register].
Acesst 1.0 6251194
Содержание XPECTIA FZ3
