Omron XPECTIA FZ3, Руководство пользователя

Страница: 84 / 440

2
Measurement
82 ECM Search FZ3 Processing Items List Manual
2.
Specify each of the following items.
Setting item
Set value
[factory
default] Description
Output
Coordinates
●
[After
scroll]
●
Before
scroll
As measurement results, select whether to output coordinate values
to external devices before or after the position deflection correction is
applied.
Calibration
●
[OFF]
●
ON
Select whether to reflect the calibration in the values output to the
external device as measurement results.
ON: Output the coordinates converted into actual dimensions.
OFF: Output the camera coordinate values.
Reflect to
overall
judgement
●
[ON]
●
OFF
Enables choosing whether or not the judgement results of this
processing unit is reflected in the scene overall judgement.
Key Points for Test Measurement and Adjustment (ECM Search)
The following content is displayed in the "Detail result" area as text.
Displayed items Description
Judge Judgement result
Correlation Correlation value
Position X X coordinate of the position where the model is detected
Position Y Y coordinate of the position where the model is detected
Angle Angle of the position where the model is detected
Key Points for Adjustment
Select the adjustment method referring to the following points.
When the measurement results are unstable
Parameter to
be adjusted
Remedy
Measurement
If images that should be judged OK vary greatly, specify a smaller value for "Candidate level".
If the model image is small and unstable, specify a smaller value for the "Reduction".
Acesst 1.0 6251194