Omron XPECTIA FZ3, Руководство пользователя

Страница: 281 / 440

2
Measurement
FZ3 Processing Items List Manual Circle Angle 279
Output Parameters (Circle Angle)
Specify how to treat the coordinates to be output to the external device as measurement results.This
item can be changed if necessary.Normally, the factory default value will be used.
Important
●
After setting up the measurement parameters, changing the output parameters will cause measurement results
to vary accordingly.If the output parameters have been changed, re-specify the measurement, too.
1.
Tap [Output parameter] in the Item Tab area.
2.
Set up each item.
Setting item
Set value
[Factory
default]
Description
Output
Coordinates
●
[After
scroll]
●
Before
scroll
As measurement results, select whether to output coordinate values
to external devices before or after the position deflection correction is
applied.
Calibration
●
[OFF]
●
ON
Select whether to reflect the calibration in the values output to the
external device as measurement results.
ON: Output the coordinates converted into actual dimensions.
OFF: Output the camera coordinate values.
Key Points for Test Measurement and Adjustment (Circle Angle)
The following content is displayed in the "Detail result" area as text.
Displayed items Description
Judgement Judgement result
Rotation angle Measured Angle
Center position X Center position X of circle in measurement results
Center position Y Center position Y of circle in measurement results
Reference angle Angle of the circle drawn as the measurement region
Reference X Reference position X of the circle drawn as the measurement region
Reference Y Reference position Y of the circle drawn as the measurement region
Key Points for Adjustment
Select the adjustment method referring to the following points.
Acesst 1.0 6251194