Omron R6YXC1000 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 260

Omron R6YXC1000 Скачать руководство пользователя страница 14

Safety Instr

uctions

S-2

2. Signal words used in this manual

This manual uses the following safety alert symbols and signal words to provide safety instructions that must
be observed and to describe handling precautions, prohibited actions, and compulsory actions. Make sure
you understand the meaning of each symbol and signal word and then read this manual.

DANGER

This indicates an immediately hazardous situation which, if not avoided, will result in death or serious injury.

WARNING

This indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

This indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury, or
damage to the equipment.

NOTE

Explains the key point in the operation in a simple and clear manner.

«
...
12
13
14
15
16
...
»

Содержание R6YXC1000





































































































































































































































































Отзывы:

Нет отзывов