![background image](http://html1.mh-extra.com/html/omron/nx-ecc201/nx-ecc201_user-manual_742778326.webp)
13 Troubleshooting
13 - 48
NX-series EtherCAT Coupler Unit User’s Manual (W519)
001B
Process Data WDT
Error
A timeout was
detected for an I/O
data send frame.
Not saved.
Possible.
Review the following items, and
restart the slave based on the speci-
fications of the connected EtherCAT
master.
• Wire the EtherCAT communica-
tions cable correctly.
• Check to see if the EtherCAT
communications cable is exposed
to excessive noise.
• Set the synchronization cycle cor-
rectly.
001D
RxPDO Setting
Error
An error was
detected in the
RxPDO settings.
Not saved.
Possible.
Correct the settings, and then down-
load the settings to the EtherCAT
master again.
001E
TxPDO Setting
Error
An error was
detected in the
TxPDO settings.
Not saved.
Possible.
Correct the settings, and then down-
load the settings to the EtherCAT
master again.
001F
PDO WDT Setting
Error
An incorrect PDO
WDT setting was
detected.
Not saved.
Possible.
Correct the settings, and then down-
load the settings to the EtherCAT
master again.
0024
TxPDO Mapping
Error
An illegal TxPDO
was set.
Not saved.
Possible.
Correct the settings, and then down-
load the settings to the EtherCAT
master again.
0025
RxPDO Mapping
Error
An illegal RxPDO
was set.
Not saved.
Possible.
Correct the settings, and then down-
load the settings to the EtherCAT
master again.
0028
SM Event Mode
Setting Error
An SM Event Mode
that is not sup-
ported was set.
Not saved.
Possible.
Correct the settings, and then down-
load the settings to the EtherCAT
master again.
002C
Synchronization
Error during Oper-
ation
Inputs of the SYNC0
interrupt signal
stopped midway
during operation in
Safe-Operational
state or Operational
state.
Not saved.
Possible.
Review the following items, and
restart the slave based on the speci-
fications of the connected EtherCAT
master.
• Wire the EtherCAT communica-
tions cable correctly.
• Check to see if the EtherCAT
communications cable is exposed
to excessive noise.
• Correct the synchronization cycle
setting in the EtherCAT master or
EtherCAT Coupler Unit.
002D
Synchronization
Error at Synchroni-
zation Start
After DC Mode was
confirmed, the first
SYNC0 signal input
was never detected.
Not saved.
Possible.
Review the following items, and
restart the slave based on the speci-
fications of the connected EtherCAT
master.
• Wire the EtherCAT communica-
tions cable correctly.
• Check to see if the EtherCAT
communications cable is exposed
to excessive noise.
• Set the synchronization cycle cor-
rectly.
AL status
code (hex)
Status name
Contents
Error log
record
Notifica-
tion to
EtherCAT
master
Corrective action
Содержание NX-ECC201
