![background image](http://html1.mh-extra.com/html/omron/nx-ecc201/nx-ecc201_user-manual_742778300.webp)
13 Troubleshooting
13 - 22
NX-series EtherCAT Coupler Unit User’s Manual (W519)
Event name
Memory Corruption Detected
Event code
10430000 hex
Meaning
Memory corruption was detected.
Source
EtherCAT Master Function Mod-
ule
Source details
EtherCAT Cou-
pler Unit
Detection
timing
Continuously
Error
attributes
Level
Minor fault
Recovery
Cycle the power
supply to the
EtherCAT Cou-
pler Unit.
Log category
System
Effects
User program
Continues.
Operation
I/O refreshing for the NX Units in the EtherCAT Slave
Terminal stops. Messages cannot be sent to the NX
Units in the EtherCAT Slave Terminal.
Sys-
tem-defined
variables
Variable
Data type
Name
None
---
---
Cause and
correction
Assumed cause
Correction
Prevention
Memory corruption was detected.
Cycle the power supply to the
EtherCAT Coupler Unit. If this
error occurs again even after you
cycle the power supply, replace
the EtherCAT Coupler Unit.
None
Attached
information
None
Precautions/
Remarks
None
Event name
Unit Configuration Error, Too Many Units
Event code
24A00000 hex
Meaning
The number of connected NX Units exceeds the maximum value for the EtherCAT Coupler Unit.
Source
EtherCAT Master Function Mod-
ule
Source details
EtherCAT Cou-
pler Unit
Detection
timing
When power is
turned ON to
the EtherCAT
Coupler Unit or
the Slave Ter-
minal is
restarted
Error
attributes
Level
Minor fault
Recovery
Cycle power to
the EtherCAT
Coupler Unit or
restart the
Slave Terminal.
Log category
System
Effects
User program
Continues.
Operation
The Slave Terminal stops in Pre-Operational state.
I/O refreshing for the NX Units in the EtherCAT Slave
Terminal stops. Messages cannot be sent to the NX
Units in the EtherCAT Slave Terminal.
Sys-
tem-defined
variables
Variable
Data type
Name
None
---
---
Cause and
correction
Assumed cause
Correction
Prevention
More than the maximum number
of NX Units is connected to the
EtherCAT Coupler Unit.
Reduce the number of NX Units
that are connected to the maxi-
mum number or fewer.
Configure the EtherCAT Slave
Terminal within the maximum
number of NX Units.
Attached
information
None
Precautions/
Remarks
None
Содержание NX-ECC201
