![background image](http://html1.mh-extra.com/html/omron/nx-ecc201/nx-ecc201_user-manual_742778312.webp)
13 Troubleshooting
13 - 34
NX-series EtherCAT Coupler Unit User’s Manual (W519)
Event name
Process Data WDT Error
Event code
85000000 hex
Meaning
Process data communications were stopped for more than the specified period of time.
Source
EtherCAT Master Function Mod-
ule
Source details
EtherCAT Cou-
pler Unit
Detection
timing
Continuously
Error
attributes
Level
Minor fault
Recovery
Reset error in
EtherCAT Cou-
pler Unit.
Log category
System
Effects
User program
Continues.
Operation
The Slave Terminal moves to Safe-Operational
state. Output refreshing for all of the NX Units in the
EtherCAT Slave Terminal stops.
Sys-
tem-defined
variables
Variable
Data type
Name
None
---
---
Cause and
correction
Assumed cause
Correction
Prevention
The EtherCAT communications
cable is disconnected or broken.
Connect the EtherCAT communi-
cations cable securely.
Connect the EtherCAT communi-
cations cable securely.
There is an error in the host con-
troller.
Check the operation of the host
controller and take appropriate
measures if there is a problem.
None
Attached
information
None
Precautions/
Remarks
None
Event name
Synchronization Interruption Error
Event code
85010000 hex
Meaning
A synchronization interruption error occurred.
Source
EtherCAT Master Function Mod-
ule
Source details
EtherCAT Cou-
pler Unit
Detection
timing
Continuously
Error
attributes
Level
Minor fault
Recovery
Reset error in
EtherCAT Cou-
pler Unit.
Log category
System
Effects
User program
Continues.
Operation
The Slave Terminal moves to Safe-Operational
state. Output refreshing for all of the NX Units in the
EtherCAT Slave Terminal stops.
Sys-
tem-defined
variables
Variable
Data type
Name
None
---
---
Cause and
correction
Assumed cause
Correction
Prevention
The EtherCAT communications
cable is disconnected or broken.
Connect the EtherCAT communi-
cations cable securely.
Connect the EtherCAT communi-
cations cable securely.
There is a synchronization setting
error in the EtherCAT Coupler
Unit.
Set the synchronization fre-
quency to the shortest synchroni-
zation time in the EtherCAT
Coupler Unit or higher.
Set the synchronization fre-
quency to the shortest synchroni-
zation time in the EtherCAT
Coupler Unit or higher.
There is a hardware error in the
EtherCAT Coupler Unit.
If the error occurs again even after
you make the above correction,
replace the EtherCAT Coupler
Unit.
None
Attached
information
None
Precautions/
Remarks
None
Содержание NX-ECC201
