![background image](http://html1.mh-extra.com/html/omron/fz4-series/fz4-series_user-manual_1633222087.webp)
3
Performing
Test
Measurement/Starting
Operation
FZ4 User's Manual
Arranging the RUN Window
85
Freeze
The image that was scanned in the immediately preceding measurement is displayed. Images can
be updated at any time during measurement.
Last NG
The latest NG error image resulting from an overall judgement is displayed.
The latest measurement results are always shown in overall judgement and measurement time. In
this case, the overall judgement result and measurement time may conflict with the camera images.
Also, during continuous measurement, "Last NG" cannot be displayed.
Note
●
Tapping the Image Display area or flow when "Last NG" is displayed and made active clears the screen.Be sure
to capture "Last NG" before performing any other operation.
●
If a measurement trigger is input during multi-input status or immediately after BUSY is turned off (during
display update processing, etc.), "Last NG" cannot be displayed.
●
[Display Last NG Image] fulfills a similar function as a processing item in which up to 4 NG error images can be
saved.If this processing item is used, "Last NG" can be acquired without operation having any effect on
acquisition.
Enlarging Measurement Images [Zoom Images]
Set the measurement image zoom status (magnification and display position).During display of multiple
images, magnification can be set for each image.
1.
On the Main screen, tap [View] - [Zoom images].
A magnification setting tab is displayed in the top right of the measurement image.
2.
Set the magnification as required.
Setting item
Set value
[Factory default]
Description
Measurement image magnification
setting
●
[Auto]
●
25%
●
50%
●
100%
●
200%
●
400%
●
800%
●
1600%
Sets magnification.
3.
Drag images to specify the display position as required.
4.
On the Main screen, tap [View] - [Zoom images].
The current magnification and display position are saved.
Displaying Flow and Detailed Results
Switches display of [Flow] and [Detail result] on/off of in the Control area.
Note
●
The same operation is available by tapping [View] - [Flow] or [Detail result].
Acesst 1.0 6251194
Содержание FZ4 Series
