![background image](http://html1.mh-extra.com/html/omron/fz4-series/fz4-series_user-manual_1633222334.webp)
5
Saving/Loading
Data
332
Saving Settings Data to Controller Memory
FZ4 User's Manual
Saving Settings Data to Controller Memory
Saves system data and scene group data on the controller's flash memory. Make sure to save settings
data when settings have been changed.
Important
●
If "Save to file" is performed for scene group 0 data, the data being saved will also be saved to the
controller flash memory at the same time. Do not turn off the power during processing. The controller may not
start up properly the next time it is turned on.
●
During data transfer to USB memory, do not remove the USB memory device until transfer is completed. Data
and/or the USB memory may corrupt.
Note
●
When using scene groups 1 to 31, only system data can be saved in the controller flash memory. Note,
however, that if a USB memory device is plugged in, scene group data can be saved to the USB memory. (For
FZ4-11
/H11
, all data are saved in the controller.)
When Using Scene Group 0
1.
On the Main screen, tap [Data save] in the toolbar.
A confirmation message is displayed.
Note
●
The same operation is available by tapping [Data] menu - [Data save].
2.
Tap [Yes].
System data and scene group data are saved on the controller's flash memory.
When Using Scene Groups 1 to 31
1.
Plug a USB memory device into the controller.
2.
On the Main screen, tap [Data save] in the toolbar.
A confirmation message is displayed.
3.
Tap [Yes].
System data is saved to the controller's flash memory and scene group data is saved to the USB
memory, respectively.
The data from scene groups 1 to 31 is saved to the USBDisk. (For FZ4-11
/H11
, all
data are saved in the controller.)
When multiple USB memories are connected to the controller, check in the file explorer window,
Acesst 1.0 6251194
Содержание FZ4 Series
