![background image](http://html1.mh-extra.com/html/omron/fz4-series/fz4-series_user-manual_1633222440.webp)
7
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
438
Controlling/Outputting through Serial Communication (Non-procedure)
FZ4 User's Manual
Setting item
Setting value
[Factory default]
Description
Address setting
●
Obtain an IP address automatically
●
[Use the following IP address]
Set the IP address of the
controller.
When "Obtain an IP address
automatically" is selected, the IP
address of the controller will be
automatically obtained.
When "Use the following IP
address" is selected, set the IP
address, subnet mask, and the
default gateway address.
IP address
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
[10.5.5.100]
Input the controller IP address.
Subnet mask
0.0.0.0 to
255.255.255.255
[255.255.255.0]
Input the subnet mask address.
Default gateway
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
[10.5.5.110]
Input the default gateway address.
DNS server
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
[10.5.5.1]
Input the DNS server address.
I/O setting
Input mode
[Normal]
This item cannot be changed.
Input form
[ASCII]
This item cannot be changed.
Output IP address
[Note 1]
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
[0.0.0.0]
Input the output destination IP
address.
TCP Server
[Note 2]
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
[10.5.5.101]
Input the TCP server IP address.
Input/Output port No.
0 to 65535
[9600] [9876]
[Note
3]
Set the port No. to use for data I/O
with the controller. Set the same
No. as on the host side.
[Note 1]: This is not displayed if the communication module is set to "Non-procedure (TCP)" or
"non-procedure (TCP Client)".
Acesst 1.0 6251194
Содержание FZ4 Series
