Omron FZ4 Series Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 656

Omron FZ4 Series Скачать руководство пользователя страница 30

1

Before

Operation

28

Saving Settings and Turning Power Off

FZ4 User's Manual

Saving Settings and Turning Power Off

Before turning off power to the controller, perform the following operations to save the data that you
have set.
The controller loads scene data from the flash memory each time during start-up. Therefore, if the power
is turned off without saving data to the flash memory, any changes made will not be saved.

1.

On the Main screen (ADJUST window), tap [Data save] in the toolbar to save the setting data.

2.

Exit after powering off the controller.

Note

●

Data to be saved

Scene data and system data are saved in the controller. Logging images and data saved in the RAMDisk
are not saved. Perform any of the following procedures to keep this data.
- Copy data saved in the RAMDisk to the USB memory.
Reference:

Copying/Moving Files (p.338)

- Change the save destination of logging data to USB memory.
Reference:

Saving Logging Images to RAMDisk/USB Device (p.336)

●

When using the scene group function

The scene data set in Scene group 0 is saved in the controller. The scene data from scene groups 1 to
31 is saved to the USB memory and overwrites previous saved data. (For FZ4-11

/H11

, all

data are saved in the controller.)

Turning Off LCD

This function is specific to FZ4-600/700/1100 series LCD-integrated controllers.
Turn off the LCD only without turning off the controller.

1.

Open the measurement manager bar at the bottom right of the Main screen and tap [LCD Off].

A confirmation message is displayed.

2.

Tap [OK].

Acesst 1.0 6251194

«
...
28
29
30
31
32
...
»

Содержание FZ4 Series

















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов