Omron FZ4 Series Скачать руководство пользователя страница 210 | Manualshive

Страница: 210 / 656

Omron FZ4 Series Скачать руководство пользователя страница 210

4

Using

Tool

208

Using Custom Command

FZ4 User's Manual

Copies a file within the memory card.

Fcopy <Original to be Copied>,<Copy Destination>

Parameters

<Original to be Copied>

The path of the original that will be copied (character string type).

<Copy Destination>

The path for the copy destination file (character string type).

Return Value

None.

Description

Always specify an absolute path with the drive name included for the <Original to be Copied> and <Copy
Destination>.
Wild Cards cannot be used in the <File Path Name>.Refer to Wild Cards for details on Wild Cards.
Reference:

Wildcard (p.168)

When the destination file already exists, that file is overwritten. When no file exists, it is created.
When the File Name for the copy destination has been omitted (when only the directory name and path
have been specified), it is copied using the same name as the original file.
Files will not be copied in the cases stated below.
The original file to copy from does not exist.
The destination directory does not exist.
No Memory Card has been attached.
There is insufficient memory on the Memory Card.

Example

Copy the 1280-720.bmp file below from directory "C:\" to directory "D:\".

Fcopy "C:\1280-720.bmp","D:\1280-720.bmp"

Truncates everything after the radix point and gets the integer value.

Fix (<expression>)

Parameters

<expression>

The expression that truncates everything after the radix point (double-precision type)

Return Value

Returns the value of the integer.
The content of the value is the truncated value of the specified expression.

Acesst 1.0 6251194

«
...
208
209
210
211
212
...
»

Содержание FZ4 Series

















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов