Omron FZ4 Series, Руководство пользователя, Страница: 336 / 656

5
Saving/Loading
Data
334 Saving Settings Data to RAMDisk/USB Device FZ4 User's Manual
Saving Settings Data to RAMDisk/USB Device
Saves the setting data file to the RAM Disk or USB memory. The data that can be saved is as follows.
Data Description
System data
(*.ini) Settings data, such as the [System] menu settings contents, which is shared within the
controller
Scene data
(*.scn) Data for each scene. Sequence of units set in each scene and setting values of units
within scenes.
Scene group data
(*.sgp)
The data of scene group with 32 scenes.
Scene group 0
data
(*.bkd)
Data combining the system data and the data from Scene Group 0.
Important
●
During saving, do not restart, turn off power or remove the USB memory.Data will be corrupted and the system
will not work properly at the next start-up. It is especially necessary to pay attention when "Save to file" is being
performed for scene group 0 data, as the data being saved will also be saved to the controller flash
memory at the same time.
Note
●
When "Save to file" is executed, the data to save is also saved in the controller (except Scene Group Data 1 to
31).
1.
When saving to USB memory, plug a USB memory device into the controller.
2.
On the Main screen, tap [Data] - [Save to file].
The Save to File window is displayed.
3.
Tap [Setting data] and select the data to save.
4.
When scene data is selected, tap [ ] to select the scene number that is to be the save target.
5.
Specify the save destination folder and file name.
Acesst 1.0 6251194