![background image](http://html1.mh-extra.com/html/omron/fz4-series/fz4-series_user-manual_1633222066.webp)
2
Setting
Scenes
(Measurement
Flow)
64
Editing Processing Units in Scenes
FZ4 User's Manual
●
Deleting a processing unit (
)
Deletes processing units within a scene.
●
Changing the name of a processing unit (
)
Changes processing unit names within a scene. Unit names must begin with a character other
than
°
(semi-voiced sound symbol) and " (voiced sound symbol). Also, unit names cannot
consist of only a single-byte number, only a "+", or only a ".".
●
Setting details of a processing unit (
)
Sets the properties of any processing unit within a scene.
●
Shift area (
)
Changes related figure data in one batch.
●
New Folder (
)
Used when multiple processing units are managed as one group.
●
Operating processing units as a group (
)
Used when processing units are copied or deleted together. A checkbox is displayed in the
processing unit if [Multiple selection] is tapped. Checked processing items can be operated as a
group.
●
Ref. other Scene's flow (
)
Units of other scenes can be referred to and added to the current scene flow.
Selecting a scene to refer to displays the flow for that scene.
Note
●
If a processing unit is inserted, the numbers for the subsequent processing units increase by one. With
processing items related to results output or branch control, the numbers for processing units set as references
also automatically increase by one.
●
If a button other than [Paste] is tapped after pasting a processing unit, continued pasting of the processing
cannot be performed.
●
If a processing unit is deleted, the numbers for the subsequent processing units decrease by one. With
processing items related to results output or branch control, the numbers for processing units set as references
also automatically decrease by one.
●
To make a specific processing unit not display in a flow on the ADJUST window or RUN window, insert a "*"
(single byte) at the beginning of the processing unit name.
●
The number of units that can be set in a flow depends on the available data memory.
Acesst 1.0 6251194
Содержание FZ4 Series
