![background image](http://html1.mh-extra.com/html/omron/dst1-series/dst1-series_operation-manual_743062053.webp)
3-2
Remote I/O Allocations
3-1-3 Test Output Parameters
Parameter name
Value
Description
Default
Not Used
The corresponding test output is not
used.
Standard Output
Specifies connecting to the input for a
muting lamp or PLC. Used as a monitor
output.
Pulse Test Output
Specifies connecting a device with a
contact output in combination with the
safety input.
Power Supply Output Specifies connecting to the power supply
terminal of a safety sensor. The voltage
supplied from the test output to the I/O
power supply (V, G) is output.
S Test Output Mode
Muting Lamp Output
(Terminal T3 only)
Specifies a muting lamp output.
When the output is ON, disconnection of
the muting lamp can be detected.
Not Used
Clear OFF
Fault
Action
Hold Last Data
Sets the output state of the test output
when a communications error occurs.
This parameter is enabled when the Test
Output Channel Mode is set to
Standard
Output
or
Muting Lamp Output
.
Clear
OFF
I/O Comment
32 characters max.
Sets an I/O comment for the test output.
The I/O comment set here is used as the
I/O tag in the Logic Editor.
None
Time
Maintenance
Counter Mode
Choice
Count
Sets the operating mode for the
maintenance counter.
Time
Threshold
Maintenance
Counter
0 to 4,294,967,295
hours
Sets the threshold value for the
maintenance counter.
0
3-4
Содержание DST1 Series
