manualshive.com logo in svg

Omron DST1 Series, Руководство по эксплуатации, Страница: 10 / 114

Поделиться
Скачать
Omron DST1 Series Скачать руководство пользователя страница 10

Read and Understand this Manual 

 

Read and Understand this Manual 

 
Please read and understand this manual before using the product. Please consult your 
OMRON representative if you have any questions or comments. 
 
 

Warranty and Limitations of Liability 

 

WARRANTY  

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a 
period of one year (or other period if specified) from date of sale by OMRON. 

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING 
NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE 
PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS 
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR 
INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.   

 

 

LIMITATIONS OF LIABILITY 

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, 
LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, 
WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT 
LIABILITY.  

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on 
which liability is asserted.   

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS 
REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS 
WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO 
CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.   

 

4 

Содержание DST1 Series



















































































































Отзывы:

Нет отзывов