manualshive.com logo in svg

Omron DST1 Series, Руководство по эксплуатации, Страница: 42 / 114

Поделиться
Скачать
Omron DST1 Series Скачать руководство пользователя страница 42

1-4 Description of Safety Functions

 

Error Recovery 

All conditions below are necessary to recover from an error that has occurred in a 
safety output. 
• The cause of the error must be removed. 
• Error latch time must have passed. 
• The output signals to the output I/O tags from the user application that correspond to 
the safety output must go inactive. 
 

1-4-4 

Input Reaction Time 

The input delay is the time from when an input signal is changed to when the new 
signal status is sent to the network.   
 

Max. Input Reaction Time: 16.2ms + setting value of ON/OFF delay 
 

Note:  

Refer to the

 System Configuration Manual (Z905) 

for system reaction time.

 

 

 

1-4-5 

Output Reaction Time 

The output delay is the time from when a network signal is received to when the status 
of the output terminal is changed.   
 

Max. Output Reaction Time: 6.2ms + 20ms

 

(Relay response time, DST1-MRD08SL-1 only) 

 

Note:  

Refer to the

 System Configuration Manual (Z905) 

for system reaction time

 

 

1-19 

Содержание DST1 Series



















































































































Отзывы:

Нет отзывов