Omron DST1 Series Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 114

background image

1-1 Overview

1-1-2 DST1-series

Safety

I/O Terminals Features

Safety Inputs

• Semiconductor output devices such light curtains can be connected as well as

contact output devices such as emergency stop switches.

•  Faults in external wiring can be detected.
•  Input delays (ON delays and OFF delays) can be set.
•  Pairs of related local inputs can be set to Dual Channel Mode in order to be

compliant with the Category 4 standards.

When Dual Channel Mode is set, the input data patterns and the time discrepancy

between input signals can be evaluated.

Test Outputs

• 4 independent test outputs are available to use.
• A disconnected external indicator lamp can be detected. (Can be set for the T3

Terminal only.)

• Test outputs can be used as power supply terminals to devices such as sensors.
• Test outputs can be used as the standard output terminals for monitor outputs.

Safety Outputs

Semiconductor Outputs

• Pairs of related local outputs can be set to Dual Channel Mode in order to be

compliant with the Category 4 standards.

When Dual Channel Mode is set, the output data patterns can be evaluated.

• The rated output current is 0.5 A max. per output.

Relay Outputs

• Pairs of related output terminals can be set to Dual Channel Mode in order to be

compliant with the Category 4 standards.

When Dual Channel Mode is set, the output data patterns can be evaluated.

• The rated output current is 2 A max. per output.
• The safety relays can be replaced.

DeviceNet Safety Communications

As a Safety Slave, the DST1-series Safety I/O Terminals can perform safety I/O
communications with up to four connections.

DeviceNet Standard Communications

As a Standard Slave, the DST1-series Safety I/O Terminals can perform standard I/O
communications with one Standard Master with up to two connections.

System Startup and Error Recovery Support

• Error information can be checked by using the error log function or the indicators on

the front of the DST1-series Safety I/O Terminals.

• The DST1-series Safety I/O Terminal’s safety I/O data and internal status information

can be monitored from a Standard PLC by allocating the information in the standard
Master. In the same way, the information can be monitored from a safety PLC by
allocating the information in the Safety Master.

.

Access Control with a Password

The DST1-series Safety I/O Terminals configuration data is protected by a password.

1-3

«
...
24
25
26
27
28
...
»

Содержание DST1 Series



















































































































Отзывы:

Нет отзывов

Похожие инструкции для DST1 Series

Бренд: Bang & Olufsen Страницы: 20

Бренд: Bang & Olufsen Страницы: 24

BeoSound Ouverture

Бренд: Bang & Olufsen Страницы: 44

Бренд: Idemia Страницы: 29

Бренд: RainSoft Страницы: 16

Бренд: Vestil Страницы: 8

Бренд: Fender Страницы: 6

K-1200-IP Series

Бренд: Viking Страницы: 25

Бренд: Haibrain Страницы: 26

Бренд: Ravaglioli Страницы: 68

Бренд: M-system Страницы: 3

Бренд: CAME Страницы: 40

Бренд: ELFON Страницы: 48

Бренд: Tyco Fire Product Страницы: 8

G2+ Soul S5110 Art 4

Бренд: golmar Страницы: 36

Бренд: Supersonic Страницы: 6

Бренд: Interlift Страницы: 6

Бренд: Honeywell Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды