Omron DeviceNet Safety, Руководство по настройке системы

Страница: 52 / 376

18
Applications Section 2-1
Start the Network Configurator and connect it to the network via the USB
port on the NE1A-series Controller or via DeviceNet or EtherNet/IP.
Refer to 3-3 Connecting to the Network.
24. Reading the Network Configuration File
Read the saved network configuration file with verified parameters.
Refer to 3-5-3 Reading a Network Configuration File.
25. Configuration Lock
Lock the configuration of all the devices to indicate that they have been ver-
ified as well as to prevent parameters from being mistakenly rewritten.
Refer to 3-9-1 Locking the Device Configuration.
26. Saving the Network Configuration File
Save the file of a virtual network with a locked configuration.
Refer to 3-5-2 Saving the Network Configuration File.
27. Exiting the Network Configurator
Exit the Network Configurator.
IMPORTANT • After configuring all the devices, user testing must be performed to con-
firm that the configuration data and operation of each device are correct.
User testing is performed to verify the safety signature for each device.
• The configuration must be locked after user testing has been completed.
Restarting the System
28. Running the System
Run the system.
! WARNING
Safety functions may be impaired and serious injury may occasionally occur.
Before operating the system, perform user testing to confirm that the configu-
ration data of all the devices is correct and that they are operating correctly.