Omron DeviceNet Safety, Руководство по настройке системы

Страница: 173 / 376

139
Setting the Controller as an EtherNet/IP Standard Target Section 5-4
• To define a new I/O tag, click the New Button and set the tag name and
data type. I/O tags for up to 16 bytes can be defined in each I/O assembly.
• To change an I/O tag that has already been defined, select the I/O tag that
you want to change and click the Edit Button.
• To delete an I/O tag that has already been defined, select the I/O tag that
you want to delete and click the Delete Button.
Note I/O tag names and I/O comment names cannot consist of only spaces.
Setting Bit Tags
With NE1A-series Controllers with unit version 1.0 or later (including NE1A-
SCPU01-EIP and NE1A-SCPU02-EIP), tags can be set for each bit in the
standard assembly just as they can be for the safety assembly.
Status
When the I/O type is Input , the NE1A-series Controller status information can
be included in the I/O assembly. The following tag names are automatically
used for the status information.
Local I/O Data
When the I/O type is Input , the NE1A-series Controller local I/O information
can be included in the I/O assembly just as it can be for the safety I/O assem-
bly.
Routing I/O
When the I/O type is Input , I/O information set for safety connections using
DeviceNet Safety can be included in the I/O assembly.
• To define new routing I/O, click the New Button and select the applicable
connection information.
• To change an I/O tag that has already been defined, select the I/O tag that
you want to change and click the Edit Button.
• To delete an I/O tag that has already been defined, select the I/O tag that
you want to delete and click the Delete Button.
Status Tag name
General status General Status
Local input status Local Input Status
Local output status Local Output Status
Test output/muting lamp status Test Output/Muting Lamp Status