Omron DeviceNet Safety Скачать руководство пользователя страница 163

Страница: 163 / 376

129

Safety Slave Settings

Section 5-2

I/O Tag

Multiple I/O tags can be defined in an I/O assembly. The I/O tags defined here
can be used in the Logic Editor.

• Click the

New

Button and set a tag name and data type when defining a

new I/O tag. I/O tags for up to 16 bytes can be defined in each I/O assem-
bly.

• To change an I/O tag that has already been defined, select the I/O tag you

want to change and click the

Edit I/O Tag

Button.

• To delete an I/O tag that has already been defined, select the I/O tag you

want to delete and click the

Delete

Button.

Note

(1) BOOL (Boolean) data is 1 byte.

(2) I/O tag names and I/O comments (names) cannot consist of only spaces.

Setting Tag Names by Bit

A tag can be set for each bit with an NE1A-series Controller with unit version
1.0 or higher (including NE1A-SCPU01-EIP and NE1A-SCPU02-EIP).

Select the applicable assembly in the I/O Assembly Setting Window.

Содержание DeviceNet Safety

























































































































































































































































































































































































Результаты поиска

Содержание DeviceNet Safety

Отзывы:

Бренды по названию

Популярные бренды

Omron DeviceNet Safety, Руководство по настройке системы

Результаты поиска

Содержание DeviceNet Safety

Отзывы:

Бренды по названию

Популярные бренды