Omron DeviceNet Safety, Руководство по настройке системы

Страница: 195 / 376

161
Menu Commands Section 6-2
6-2-3 View Menu
6-2-4 Function Menu
6-2-5 Page Menu
Command Description Online Offline
Function List Displays or hides the Function List. OK OK
Status Displays or hides the status bar. OK OK
Tool Bar Displays or hides the toolbar. OK OK
Grid Used to make grid settings such as display/hide grid,
enable/disable grid alignment, and grid width set-
tings. If grid display and alignment are enabled, a
grid will appear on the Workspace and function
blocks and I/O tags will be grid-aligned when pasted
to the Workspace. OK OK
Command Description Online Offline
Transmission
Message Setting Sets the explicit message send function.
Refer to Sending Explicit Messages in 6-3-3 Pro-
gramming Using Function Blocks .
OK OK
Monitoring Monitors I/O tag values and signal states of all the
connection lines in the Logic Editor.
Refer to 6-3-9 Monitoring the Program .
OK ---
Jump
Address Make New
Jump
Address Creates a new jump address (jump source).
Refer to Jump Addresses in 6-3-3 Programming
Using Function Blocks .
OK OK
Select
Jump
Address Pastes the destination of the jump address in the
Workspace.
Refer to Jump Addresses in 6-3-3 Programming
Using Function Blocks .
OK OK
Command Description Online Offline
Add Page Adds a new page after the last page.
Refer to Adding and Deleting a Page in 6-3-3 Pro-
gramming Using Function Blocks .
OK OK
Insert Page Inserts a new page immediately after the currently
displayed page.
Refer to Adding and Deleting a Page in 6-3-3 Pro-
gramming Using Function Blocks .
OK OK
Delete Current
Page Deletes the currently displayed page.
Refer to Adding and Deleting a Page in 6-3-3 Pro-
gramming Using Function Blocks .
OK OK
Change Page Title Changes the title of the currently displayed page.
Refer to Adding and Deleting a Page in 6-3-3 Pro-
gramming Using Function Blocks .
OK OK