Omron DeviceNet Safety, Руководство по настройке системы

Страница: 119 / 376

85
Device Reset and Status Change Section 3-10
3-10-2 Resetting Devices
Reset devices using either of the following methods. This function is enabled
only when the Network Configurator is online.
1.
Select one or more devices, and then select Device - Reset from the menu
bar.
2.
Select one or more devices, and then right-click each device and select
Reset .
The reset window of the devices will be displayed as shown in the following
example. Enter a reset type and the password and then click the
OK Button.
For example, to keep the current password setting for multiples devices with
the same password but return other information to the default, specify the set-
ting as follows:
IMPORTANT With NE1A-SCPU01-EIP and NE1A-SCPU02-EIP, resetting to the defaults
will clear the IP address settings and the mode will be switched to the mode
acquired from the BOOTP server. To not clear the IP address, select the Node
Address (Software Set) Check Box to perform a reset so that the IP address
will not change.
IMPORTANT Resetting cannot be performed in the EtherNet/IP Network Window for the
NE1A-SCPU01-EIP or NE1A-SCPU02-EIP. Perform resetting in the
DeviceNet Network Window.
Refer to A-7 Function Restrictions for the NE1A-SCPU0
@
-EIP for information
on functions that cannot be manipulated in the EtherNet/IP Network Window.
DeviceNet network EtherNet/IP network