manualshive.com logo in svg

Omron DeviceNet Safety, Руководство по настройке системы

Поделиться
Скачать
Omron DeviceNet Safety Скачать руководство пользователя страница 274

240

Screen Names and Functions

Section 9-3

Message Report Pane

Information on errors that occur during communications (e.g., downloading or
uploading) with devices is displayed.

9-3-2

Function Icons

Function name

Icon

Description

Reference

Reconnect

Connects a device online when the Maintenance Tool and a device are not 
connected.

9-5-1

Device Status

Displays the device status as well as details of alarms and warnings. Mainte-
nance information for the connected device will be displayed on the Mainte-
nance Tab Page.

9-6-3

Monitor Refresh 
Timer Settings

Sets the interval for refreshing the timing of data obtained with the monitor 
function. 

9-4

Change Target

This function is used to change the connected device.

9-5-3

Replace Device

Device parameters uploaded from the connected device are downloaded 
after replacing the device.

9-7

Error History

Displays the error history of the connected device. Maintenance information 
for the connected device will be displayed on the Maintenance Tab Page.

9-6-4

Monitor

Displays the connected device's I/O terminal status. Maintenance information 
for the connected device will be displayed on the Maintenance Tab Page.

9-6-2

Download 
(Restore)

Downloads the specified *.dvf file (i.e., device parameter file) to the con-
nected device. 

9-9

Upload (Backup)

Uploads the device parameters of the connected device and saves them on 
the computer as a *.dvf file (i.e., device parameter file). 

9-8

Download Net-
work

The specified network configuration files (*.ncf) will be downloaded to the 
safety devices connected to the network to which the connected device 
belongs. 

9-11

Upload Network

The network configurations will be uploaded as network configuration files 
(*.ncf) from the safety devices connected to the network to which the con-
nected device belongs. The files will be saved on the computer. 

9-10

Lock

Unlock

Locks or unlocks the configuration of the connected devices.

9-14

Change Mode

Changes the operating mode of the connected device.

9-13

Reset

Resets the connected device.

9-12

Change Pass-
word

Changes a device password. 

9-15

Содержание DeviceNet Safety

























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды