Omron DeviceNet Safety, Руководство по настройке системы

Страница: 320 / 376

286
Appendix A
Setting the Network Address in the Host (PC) Information Area
Set the FINS node address of the computer.
The computer (i.e., the Network Configurator) uses the OMRON FINS communications service to connect to
the DeviceNet network via the Ethernet. It is necessary to set the FINS node address as well as the IP
address.
For the network address, set the same value as the Ethernet Unit. The network address of the Ethernet Unit is
set in the routing table of the CPU Unit. Enter 0 when not using the routing table.
Setting the Node Address in the Host (PC) Information Area
Set the FINS node address of the computer.
For this setting, it is necessary to set the correspondence between the remote IP address and the FINS node
address using the OMRON Ethernet Unit. For details, refer to the
SYSMAC CS/CJ Series Ethernet Unit Oper-
ation Manual (W420, W421 and W343).
Setting the Network Address in the DeviceNet Unit Field of the Remote Information Area
Set the FINS network address of the DeviceNet Unit to which the destination DeviceNet network is connected.
Enter the value when crossing the network farther than the Ethernet network directly connected to the com-
puter. Enter 0 when not crossing network layers.
Setting the Node Address in the Device N et Unit Field of the Remote Information Area
Set the Node Address of the DeviceNet Unit to which the destination DeviceNet network is connected.
Enter the value when crossing the network farther than the Ethernet directly connected to the computer. Enter
0 when not crossing network layers.
Setting the CPU Bus Unit Number in the DeviceNet Unit Field of the Remote Information Area
Set the unit number (0 to F) of the DeviceNet Unit as a CPU Bus Unit to which the destination DeviceNet net-
work is connected.
Setting the Port Number in the Ethernet Unit Field of the Remote Information Area
Set the UDP port number with which the Ethernet Unit performs the FINS Communications Service. Set the
same value as in the setting in the CPU Bus Unit System Setting Area in the CPU Unit to which the Ethernet
Unit is mounted. Normally 9600 is used.
Setting the IP Address in the Ethernet Unit Field of the Remote Information Area
Set the IP address of the Ethernet Unit.
To set the IP address of the Ethernet Unit, refer to
SYSMAC CS/CJ Series Ethernet Unit Operation Manual
(W420, W421 and W343).
4. Click the Register Button. The set values will be registered and displayed in the Registration List.
• Name: Registration name of the destination DeviceNet network
• Node: FINS network address and FINS node address (the third number is always 0) of the computer
• Unit: FINS network address, FINS node address, and unit number of the DeviceNet Unit
• Port: FINS UDP port number of the Ethernet Unit
• IP Address: IP address of the Ethernet Unit
5. Click the Close Button to exit and return to the Setup Interface Window.
Selecting the Registration Name (Destination DeviceNet Network)
Select the DeviceNet network that you want to connect from the registration names of the registered connec-
tion destinations in the Setup Interface Window.
1. Select the destination registration name from the Registration Name Drop-down List in the Remote Infor-
mation Area.
In the Remote Information Area, the following set values of the selected registration name will be displayed.
• Network Address: FINS network address of the DeviceNet Unit
• Node Address: Node address of the DeviceNet Unit
• CPU Bus Unit Number: Unit number of the DeviceNet Unit
• Port Number: FINS UDP port number of the Ethernet Unit