Omron DeviceNet Safety, Руководство по настройке системы

Страница: 265 / 376

231
Errors That Can Be Found Using the Connection Check Function Section 8-5
The EPI of the connection (node address: connec-
tion name) is outside the supported range. Check the Register Device List of the corresponding NE1A-series
Controller, and adjust the EPI of the connection to within supported
range.
The EPI of the connection (node address: network
name: connection name) is outside the supported
range. Check the Register Device List of the corresponding NE1A-series
Controller, and adjust the EPI of the connection to within the sup-
ported range.
The number of OUT connections has exceeded the
limit. Check the number of Masters the corresponding device is regis-
tered to.
The connection (connection name) is registered as
connections to multiple nodes. Check the Register Device List of the corresponding NE1A-series
Controller, and check its connections.
The number of IN connections has exceeded the
limit. Check the Register Device List of the corresponding NE1A-series
Controller.
The number of connections has exceeded the limit. Check the Register Device List of the corresponding NE1A-series
Controller.
There is no usable connection ID resource. Set the Expansion Connection Setting to Check Produced IDs in
the Safety Slave in the Connection Settings Window.
There is no usable target connection ID resource.
Change the Safety Master ID allocation setting. Set the Expansion Connection Setting to Check Produced IDs in
the Safety Slave in the Connection Settings Window.
Message displayed on the
Network Configurator
Countermeasure