manualshive.com logo in svg

Omron DeviceNet Safety, Руководство по настройке системы

Поделиться
Скачать
Omron DeviceNet Safety Скачать руководство пользователя страница 247

213

Maintenance Functions (Unit Version 1.0 or Later)

Section 7-2

Setting the Total ON Time Alarm Threshold with the Network Configurator

The maintenance mode (Maintenance Counter Mode Choice) and alarm
threshold (Threshold Maintenance Counter) can be set for each local input,
test output, and local output terminal. 

If the alarm threshold (Threshold Maintenance Counter) is set to 0, the Con-
troller will not compare the count or time PV to the alarm threshold SV.

Monitoring the Total ON Time from the Network Configurator

Any of the following methods can be used to monitor the total ON time in the
local inputs, test outputs, or local outputs.

1.

Select the device and select 

Device – Maintenance information

 from the

menu bar. 

2.

Select the device and click the toolbar’s 

Maintenance

 Button. 

3.

Select the device, right-click that device, and select 

Maintenance infor-

mation

 from the popup menu. 

4.

Select the device, select 

Device – Monitor

 from the menu bar, and click

the 

Maintenance

 Tab in the displayed window. 

5.

Select the device, click the toolbar’s 

Device Monitor

 Button, and click the

Maintenance

 Tab in the displayed window. 

6.

Select the device, right-click that device, select 

Monitor

 from the popup

menu, and click the 

Maintenance

 Tab in the displayed window. 

Содержание DeviceNet Safety

























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды