Omron DeviceNet Safety, Руководство по настройке системы

Страница: 344 / 376

310
Appendix A
Note When any of the following errors occurs in the originator PLC while tag data links are in progress, the
connection will be forcibly disconnected.
• Fatal CPU Unit error
• I/O refreshing error
• CPU Unit WDT error
• I/O bus error
9. When you are finished registering the required tags, click the OK Button at the bottom of the Edit Tags Dialog
Box.
10. At this point, a confirmation dialog box will be displayed to check whether the registered tag names will reg-
istered without changes as tag sets. A tag set can contain up to 8 tags, but tag sets will be registered with
one tag per tag set if the tags are registered as tag sets. In this case, the
Yes Button is clicked to register
one tag per tag set.
If the Yes Button is clicked, more tags can be registered at the end of the tag set. In this case, only the tags
will be registered and they will not be registered in tag sets.
Tag Bit Settings
When bit settings are selected with tags for CS/CJ-series EtherNet/IP Units, they use two bytes of data.
When bit settings are selected with tags for NE1A-series Controllers that support EtherNet/IP Unit, they use 1
byte of data.
When two consecutive tags are set for bits in a pair of devices, memory will be allocated as follows and a con-
nection cannot be established.