Omron DeviceNet Safety, Руководство по настройке системы

Страница: 106 / 376

72
Device Parameters and Properties Section 3-7
1.
Select one or more devices, and then select Device - Parameter - Down-
load from the menu bar.
2.
Select a device, and then click the Download to Device Button on the
toolbar.
3. Select one or more devices, and then right-click each device and select
Parameter - Download .
This operation is supported for devices in networks that have a tab icon dis-
played in blue or green when the Network Configurator is connected to the
network (except when a USB connection is made to an NE1A-series Control-
ler).
First, the password input window for the device will be displayed. Enter the
password for the selected devices and click the
OK Button.
When selecting multiple devices and setting the same device password for all
the devices, select the
Use this password for all device check box in the fol-
lowing dialog box, and then entering passwords will no longer be necessary
for each device.
IMPORTANT Downloading cannot be performed in the EtherNet/IP Network Window for the
NE1A-SCPU01-EIP or NE1A-SCPU02-EIP. Perform downloading in the
DeviceNet Network Window.
Refer to A-7 Function Restrictions for the NE1A-SCPU0
@
-EIP for information
on functions that cannot be manipulated in the EtherNet/IP Network Window.
Downloading Parameters to All Devices in the Network (Network Download)
You can download parameters to all the devices in the network that is cur-
rently displayed in the Network Configuration Window by using the following
procedure.
Downloading can be performed at the same time for those networks (except
when a USB connection is made to an NE1A-series Controller.
1.
Select Network - Download from the menu bar.
2.
Click the Download to Network Button on the toolbar.
3.
In the Network Configuration Pane, right-click without selecting any device
and select
Download .
DeviceNet network EtherNet/IP network