Omron DeviceNet Safety, Руководство по настройке системы

Страница: 347 / 376

313
Appendix A
Adding Tag Sets
In order to edit a registered tag set and add tags, either double-click the tag set, or select the tag set and click
the
Edit Button. The Edit Tag Set Dialog Box will be displayed.
The Tag List on the left side of the dialog box shows the tags that are already registered, and the Candidate
Tag List on the right side of the dialog box shows the other tags that have not been registered yet. To add a tag,
select it in the Candidate Tag List and click the Button.
When the PLC status is being included in the tag set, select the Include Option at the upper-right corner of the
dialog box.
Note When using EtherNet/IP target I/O with an NE1A-series Controller, specify not including PLC status.
Connection Settings
After creating the tag sets, click the Connections Tab at the top of the Edit Device Parameters Dialog Box, and
set the following connection information.
• The target devices with which connections will be opened
• Whether the tag sets are input or output tag sets
• The length of the packet intervals (RPI)
Make the Connections settings in the originator only. The Connections settings are not necessary in the target
device.
Note Make the Connections settings after creating tag sets for all of the devices involved in tag data links.
Registering Devices in the Register Device List
1. Display the originator device’s Edit Device Parameters Dialog Box by double-clicking the device’s icon in the
Network Configuration Window, or right-clicking the device’s icon and selecting
Parameter - Edit from the
pop-up menu.
2. Click the Connections Tab at the top of the Edit Device Parameters Dialog Box. All of the devices registered
in the network (except the local node) will be displayed.