Omron DeviceNet Safety, Руководство по настройке системы

Страница: 129 / 376

95
Editing Parameters Section 4-1
4-1-3 General Parameter Group
This section describes parameters in the general parameter group.
Item Settings Description Default
S Safety Output Error
Latch Time 0 to 65,530 ms
(in 10-ms increments)
This parameter is common to all the safety
outputs.
It sets the time to latch the error state when
an error occurs in these outputs. Even when
the cause of the error has been removed, the
error state will remain latched for the time set
here.
1,000 ms
S Safety Input Error Latch
Time 0 to 65,530 ms
(in 10-ms increments)
This parameter is common to all safety
inputs and test outputs.
It sets the time to latch the error state when
an error occurs in these inputs/outputs. Even
when the cause of the error has been
removed, the error state will remain latched
for the time set here.
1,000 ms
Test Output Idle State Clear off This parameter is common to all test outputs
for which the Test Output Channel Mode is
set to
Standard Output .
It sets the output state of the test output
when idle data is received.
Clear off
Keep output data
Unit Name 32 characters max. This parameter sets a user-chosen name for
the Safety I/O Terminal. The set name is
saved in the Safety I/O Terminal and dis-
played in the network configuration. None
Threshold Network
Power Voltage 8.0 to 30.0 V This parameter sets the threshold of the net-
work power voltage. When the voltage falls
below the set threshold voltage, the corre-
sponding bit in general status turns ON. 11.0 V
Threshold Run Hours 0 to 429,496,729 hours This parameter sets the threshold for unit
operating hours. When the operating hours
exceeds the set threshold, the correspond-
ing bit in general status will turn ON. 0 hours
Last Maintenance Date January 1, 1972 to Jan-
uary 19, 2038 This parameter saves the maintenance date
in the Safety I/O Terminal. January 1,
1972