Omron CX-Process Monitor Plus 2, Руководство по эксплуатации

Страница: 27 / 272

12
CX-Process Monitor Plus Section 1-1
Register the Function
Blocks to Exchange Data
with the CX-Process
Monitor Plus. Register and connect the function blocks to exchange data with the CX-Pro-
cess Monitor Plus. The following function blocks can be used depending on
the items to be monitored.
Set CSV Tags and Tags for
CX-Process Monitor Plus. The CX-Process Monitor Plus uses tags set from the CX-Process Tool (Ver.
3.2 or higher) to read and write data in Loop Control Units/Boards. To use the
CX-Process Monitor Plus, therefore, CSV tags and tags for the CX-Process
Monitor Plus must be set.
Loop Control Units
1,2,3... 1. Register the Send All Blocks block (Block Model 642) and Receive All
Blocks block (Block Model 641).
2. Set tags as follows:
• Function block data: Set CSV tags.
• Individual contact signals: Set tags for Monitor Plus for the contacts in the
Internal Switch block (Block Model 209).
• Individual analog signals from LCU to computer: Set tags for Monitor Plus
for the analog signals in the Input Selection block (Block Model 162).
• Individual analog signals from computer to LCU: Set tags for Monitor Plus
for the analog signals in the Constant Generator block (Block Model 166).
Items to
monitor
Registrations and
connections
Loop Control Unit Loop Control Board
Function
block data Only register the func-
tion blocks. Send All Blocks block (Block Model 462)
and Receive All Blocks block (Block
Model 461) HMI settings in the System Common
block (Block Mode 000)
Contact
signals Register and connect
the function blocks. Contact Distributor (Block Model 201) or Internal Switch (Block Model 209)
Analog
signals Register and connect
the function blocks. Input Selector block (Block Model 162) and Constant Generator block (Block Model
166)
Block to input analog signals from
the CX-Process Monitor Plus. Main function blocks Block to output analog signals to
the CX-Process Monitor Plus.
Blocks to monitor function
block ITEM tags from the
CX-Process Monitor Plus.
Blocks to manipulate or display contacts
from the CX-Process Monitor Plus.