Omron CX-Process Monitor Plus 2, Руководство по эксплуатации

Страница: 136 / 272

121
Segment Program 2 Screens Section 4-11
4-11-3 Segment Program 2 Edit Screen Display Examples and
Operations
Segment data for the relevant Segment Program 2 Block can be set while
observing actual segment status in realtime, and the settings can be trans-
ferred to the Loop Controller.
Note The following dialog box will be displayed if step data registered in the Loop
Controller is updated when the Segment Program 2 Edit Screen is displayed.
Click the
Yes Button to update the step data.
Editing Step Data
1,2,3... 1. Click the step area at the top of the Segment Program 2 Edit Screen.
Shows segment data collection status.
Click to display the Collection Status Monitor Dialog Box.
Click to display the dialog box for
editing data for each step. Click to move to the Segment
Program 2 Monitor Screen.
Time scroll
Shifts one half screen
to the past. Sets the time from
which data will be
displayed. Sets the maximum width
for the time axis dis-
played on the screen. Used to zoom the
scale displayed. Used to add bias to
the display. Time scroll
Shifts one half screen
to the future.
Reads Segment
Program 2 step data
from the Controller.
Writes to the Controller
the step data set on
the Segment Program
2 Edit Screen
Shows segment data collection status.
Click to display the Collection Status Monitor Dialog Box.
Click the step to be
edited.
Click to set the initial
values.