Omron CX-Process Monitor Plus 2, Руководство по эксплуатации

Страница: 247 / 272

232
Troubleshooting Section 6
Monitoring cannot be performed nor-
mally. After generating the tag file for Monitor
Plus, newly updated tag information or
network settings have not been set cor-
rectly. Correctly set the tag information of net-
work settings updated on a Builder
Screen.
After generating the tag file for Monitor
Plus, the data set with the CX-Process
Tool has not been downloaded to the
Loop Control Unit/Board. After changing the program with the CX-
Process Tool and generating the tag file
for Monitor Plus, download the data that
was set to the Loop Control Unit/Board.
It’s possible that the ladder program or
another Unit is writing data to the area
of memory used for data exchange
between the function blocks and the
CX-Process Monitor Plus. Check the ladder program and Unit con-
figuration to see if any of the following
areas of memory are being written to.
Loop Control Units: Memory area speci-
fied for Send All Block
Loop Control Board: Memory area
being used by the HMI
Tag names that are newly set cannot
be set. The CX-Process Monitor Plus was not
restarted after generating a tag file for
Monitor Plus during CX-Process Moni-
tor Plus operation. Restart the CX-Process Monitor Plus.
Phenomenon Cause Action