Olivetti PF-P09, Руководство по обслуживанию

Страница: 379 / 457

20. FAX ERROR Field Service Ver. 1.1 May 2011
336
TROUBLESHOOTING
(70) Error code: 00F0
(71) Error code: 00F1
(72) Error code: 00F2
(73) Error code: 00F3
(74) Error code: 00F4
(75) Error code: 00F5
Definition Can not receive any response procedure after sending EOR_NULL.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Change the machine setting to ECM OFF, then resend again.
3. Boost the TX level of sender's machine.
4. Boost the machine TX level. <*1>
5. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition At phase D, transmitting units out EOR_MPS 3 times consecutively but receive no
answer.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Change the machine setting to ECM OFF, then resend again.
3. Boost the TX level of sender's machine.
4. Boost the machine TX level. <*1>
5. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Received incorrect response after sending EOR_MPS.
Solution 1. Resend the FAX again.
2. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Received ERR signal after sending EOR_MPS.
Solution 1. Change the machine setting to ECM OFF, then resend again.
2. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Can not receive any response in RR response procedure after sending EOR_MPS.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Change the machine setting to ECM OFF, then resend again.
3. Boost the TX level of sender's machine.
4. Boost the machine TX level. <*1>
5. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition At phase D, transmitting units out EOR_EOP 3 times consecutively but receive no
answer.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Change the machine setting to ECM OFF, then resend again.
3. Boost the TX level of sender's machine.
4. Boost the machine TX level. <*1>
5. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
d-Color MF2400