Olivetti PF-P09, Руководство по обслуживанию

Страница: 200 / 457

Field Service Ver. 1.1 May 2011 13. SERVICE MODE
157
ADJUSTMENT
/ SETTING
13.7.6 SCAN TEST
A. Use
• If the scanner malfunctions.
B. Procedure
1. Press the Select key to begin the scanner test.
2. Press the Stop/Reset key to stop the scanner test.
13.7.7 PRINTER TEST- SENSOR
A. Use
• Used for troubleshooting when a malfunction or a misfeed occurs. (Main body)
B. Procedure
• The operation of each of the switches and sensors can be checked on a real-time basis.
• It can be checked as long as the 5 V power line remains intact even when a door is open.
(1) SENSOR TEST
Test Item Description
Sensor Condition
0 1
TRAY2 EMPTY Tray2 media empty sensor (PS2) No Paper Paper Exist
TRAY1 EMPTY Tray1 media empty sensor (PS3) No Paper Paper Exist
TRAY3 EMPTY Media empty sensor (PS1) No Paper Paper Exist
SYNC. ROLLER Registration sensor (PS5) No Paper Paper Exist
PAPER LOOP Loop detection sensor (PS6) No Paper Paper Exist
EXIT Exit sensor/1 (PS8) No Paper Paper Exist
PAPER FULL Media full sensor (PS7) No Paper Paper Exist
DUPLEX PAPER Duplex conveyance sensor (PS9) No Paper Paper Exist
TRAY3 FEEDER Media feed sensor (PS3) No Paper Paper Exist
RETRACTION 1ST
1st image transfer retraction
position sensor (PS9)
Media not present Media present
RETRACTION 2ND
2nd image transfer retraction
position sensor (PS10)
Media not present Media present
CASSETTE SET Tray2 set switch (SW5) Not set Set
Tray3 Size1 Tray3 Paper Size1 Switch OFF ON
Tray3 Size2 Tray3 Paper Size2 Switch OFF ON
Tray3 Size3 Tray3 Paper Size3 Switch OFF ON
WASTE TONER FULL Waste toner sensor (PS11) Not Full Full
d-Color MF2400