Olivetti PF-P09, Руководство по обслуживанию

Страница: 378 / 457

Field Service Ver. 1.1 May 2011 20. FAX ERROR
335
TROUBLESHOOTING
(64) Error code: 00EA
(65) Error code: 00EB
(66) Error code: 00EC
(67) Error code: 00ED
(68) Error code: 00EE
(69) Error code: 00EF
Definition Can not receive any response in RR response procedure after sending PPS_EOP.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Boost the TX level of sender's machine.
3. Boost the machine TX level. <*1>
4. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition At phase D, transmitting units out PPS_EOM 3 times consecutively but receive no
answer.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Change the machine setting to ECM OFF, then resend again.
3. Boost the TX level of sender's machine.
4. Boost the machine TX level. <*1>
5. Set SOFT SW21 [5] to “1” (T4 timer = 4.5 sec.)
6. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Received incorrect response after sending PPS_EOM.
Solution 1. Change the machine setting to ECM OFF, then resend again.
2. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Can not receive any response in RR response procedure after sent out PPS_EOM.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Change the machine setting to ECM OFF, then resend again.
3. Boost the TX level of sender's machine.
4. Boost the machine TX level. <*1>
5. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition At phase D, transmitting units out EOR_NULL 3 times consecutively but receive no
answer.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Change the machine setting to ECM OFF, then resend again.
3. Boost the TX level of sender's machine.
4. Boost the machine TX level. <*1>
5. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Received incorrect response after sending EOR_NULL.
Solution 1. Change the machine setting to ECM OFF, then resend again.
2. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
d-Color MF2400