Olivetti PF-P09, Руководство по обслуживанию

Страница: 370 / 457

Field Service Ver. 1.1 May 2011 20. FAX ERROR
327
TROUBLESHOOTING
(14) Error code: 0093
(15) Error code: 0094
(16) Error code: 009A
(17) Error code: 009F
(18) Error code: 00A0
(19) Error code: 00A1
(20) Error code: 00AE
Definition Received DCN signal after sending out DCS signal for V.34.
Solution 1. Resend the FAX again.
2. Register the telephone number in machine.
3. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Time out during transmit ECM frame or RCP command.
Solution 1. Change the machine setting to ECM OFF, then resend again.
2. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Can not detect any signal after sending CI signal.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Boost the TX level of sender's machine.
3. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Can not received any response from other side after sending PPS_EOM signal.
Solution 1. Resend the FAX again.
2. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
3. Boost the machine TX level. <*1>
4. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition User stop or cancel transmission job.
Solution 1. Resend the FAX again.
Definition Document JAM within transmission.
Solution 1. Clear JAM ERROR, then resend the FAX again.
Definition Can not finished V.8 procedure or detect V.21 signal after CM signal within 30 sec-
onds.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Boost the machine TX level. <*1>
3. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
d-Color MF2400