Olivetti PF-P09, Руководство по обслуживанию

Страница: 263 / 457

14. SOFT SWITCH SET Field Service Ver. 1.1 May 2011
220
ADJUSTMENT
/ SETTING
14.3.10 SOFT SWITCH: #10
• Bit 8: If this bit set to 1, machine will print out confirmation report after each transaction.
• Bit 7: If this bit set to 1, the result field will show “NG” instead of “OK” in the confirmation
report and activity report or checking the result on the LCD.
• Bit 2: This for manual TX only.
Bit No. Designation Function
Initial
setting
Bit HEX
8
Print out RTN page
report
0: Not to print
1
A
1: Print out RTN page report after transaction for TX/
RX RTN signal
7
Confirmation report
result field
0: Print “OK”
0
1: Print “NG” in case of sending or receiving RTN signal
6
Get gap time between
digit for pulse dial
1
5 0
4 Reserved Reserved 0
1
3
Received DIS signal
within reception
0: Repeat sending DIS/DTC again until time out
0
1: Disconnected after sending DCN signal
2
Transmission time lim-
itation
0: No any limitation until document jam
0
1: Limit to 32 minutes from data phase
1
Audio alarm after
communication fail
0: Not to alarm after transaction fail
1
1: Alarm after disconnected
Value (ms) 550 650 750 850
Bit No. 6 0 0 1 1
Bit No. 5 0 1 0 1
d-Color MF2400