Olivetti PF-P09, Руководство по обслуживанию

Страница: 308 / 457

Field Service Ver. 1.1 May 2011 15. FAX PROTOCOLS
265
ADJUSTMENT
/ SETTING
32 Extend field
“0”= Without
“1”= With
33
“0”= Invalid
“1”= Field not valid capability
34
“0”= Invalid
“1”= Multiple selective polling capability
Set to “0”
35
“0”= Invalid
“1”= Polling sub address transmission (DTC) by Polled Sub
Address (DIS)/PSA
Set to “0”
36
“0”= Invalid
“1”= T.43 coding
37
“0”= Invalid
“1”= Plane interleave
38 Set to “0”
39 Set to “0”
40 Extend field
“0”= Without
“1”= With
41
“0”= Invalid
“1”= R8 x 15.4 lines/mm
42
“0”= Invalid
“1”= 300 x 300 pels/25.4 mm
43
“0”= Invalid
“1”= R16 x 15.4 lines/mm and/or 400 x 400 pels/25.4 mm
44
“0”= Invalid
“1”= Inch based resolution preferred
Resolution type selection
“0”= metric based resolution
“1”= inch based resolution
45
“0”= Invalid
“1”= Metric based resolution preferred
Do not care
46
Minimum scan line
time capability for
higher resolutions.
“0”: T 15.4 = T 7.7
“1”: T 15.4 = 1/2 T 7.7
Do not care
47
“0”= Invalid
“1”= Selective polling (DIS)/ Selective polling transmission
(DTC)
Set to “0”
48 Extend field
0: Without
1: With
49
“0”= Invalid
“1”= Sub Addressing capability “0”= Invalid
“1”= Sub Addressing transmission
50
“0”= Invalid
“1”= Password/ Sender Identification capability (DIS)/
Password transmission (DTC) “0”= Invalid
“1”= Sender Identification transmis-
sion
51
“0”= Invalid
“1”= Ready to transmit a data file (polling)
Set to “0”
52 Set to “0”
53
“0”= Invalid
“1”= Binary File Transfer (BFT)
54
“0”= Invalid
“1”= Document Transfer Mode (DTM)
Bit
No.
Designation DIS/DTC DCS
d-Color MF2400