Olivetti PF-P09, Руководство по обслуживанию

Страница: 367 / 457

20. FAX ERROR Field Service Ver. 1.1 May 2011
324
TROUBLESHOOTING
(55) Error code: 0065
(56) Error code: 0066
(57) Error code: 0070
(58) Error code: 0071
(59) Error code: 0072
Definition Can not detect any control channel signal within 60 seconds after detect silence in
phase D.
Solution 1. Ask sender resend the FAX again.
2. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
3. Boost the TX level of sender's machine.
4. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition Can not receive T.30 signal or carrier after sending CFR in V.34.
Solution 1. Ask sender resend the FAX again.
2. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
3. Change the machine RX speed to V.17, and then ask sender resend again.
4. Boost the TX level of sender's machine.
5. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
Definition User press stop key within receiving.
Solution 1. Ask sender resend the FAX again.
Definition Memory full within receiving.
Solution 1. Split the document into several copies at sender, and send them by several dif-
ferent times.
2. Print out the receiving data which was stored in the FAX memory or delete the
unnecessary data.
3. Reboot the machine.
4. Execute MEMORY CLEAR.
Definition Received EOR_Q signal.
Solution 1. Check the line condition whether is too noisy, if necessary, please replace a new
telephone line or contact your telecom service provider.
2. Reduce the TX level of sender's machine.
3. Print out the protocol report, and provide it to technical center, ask for analyzing
the information.
d-Color MF2400