Olivetti PF-P09, Руководство по обслуживанию

Страница: 162 / 457

Field Service Ver. 1.1 May 2011 10. REPORT/STATUS
119
ADJUSTMENT
/ SETTING
C. PM parts information
• The lower right part of the configuration page shows numerical values that represent
consumable/periodic replacement parts (units) counter information.
The table below explains counter information that is provided by each numerical data.
(1) Display on the configuration page
(2) Meaning of counter value
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Display 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/
No. 25
Display 1B01/
No. 26 27 28 29 30 31 32 33 34 35 36 37
Display 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/ 0/
No. Contents
1 Replace Number of times a High-capacity toner cartridge (K) has been replaced
2
Number of times a Standard-capacity toner cartridge (K) has been replaced
* This item is not available in this machine.
3 Number of times a Non-genuine toner cartridge (K) has been replaced
4 Number of times a High-capacity toner cartridge (C) has been replaced
5
Number of times a Standard-capacity toner cartridge (C) has been replaced
* This item is not available in this machine.
6 Number of times a Non-genuine toner cartridge (C) has been replaced
7 Number of times a High-capacity toner cartridge (M) has been replaced
8
Number of times a Standard-capacity toner cartridge (M) has been replaced
* This item is not available in this machine.
9 Number of times a Non-genuine toner cartridge (M) has been replaced
10 Number of times a High-capacity toner cartridge (Y) has been replaced
11
Number of times a Standard-capacity toner cartridge (Y) has been replaced
* This item is not available in this machine.
12 Number of times a Non-genuine toner cartridge (Y) has been replaced
13 If Non-genuine TC was used, value is 1. (default is 0)
14 If Refill TC was used, value is 1. (default is 0)
15 Rate of transfer roller remaining (%)
16 Number of times a transfer roller has been replaced
17 Rate of transfer belt unit remaining (%)
18 Number of times a transfer belt unit has been replaced
19 Rate of fuser unit remaining (%)
20 Number of times a fuser unit has been replaced
21 Number of times a imaging unit (K) has been replaced
22 Number of times a imaging unit (C) has been replaced
23 Number of times a imaging unit (M) has been replaced
24 Number of times a imaging unit (Y) has been replaced
d-Color MF2400