Olivetti PF-P09, Руководство по обслуживанию

Страница: 328 / 457

Field Service Ver. 1.1 May 2011 18. MALFUNCTION CODE
285
TROUBLESHOOTING
1038 Engine connect error • Printer control board (PRCB) to MFP board/1 (MFPB/1)
connection failure.
• The copier determines that there is an error if the print con-
trol board (PRCB) fails to send an acknowledgement signal
to the MFP board/1 (MFPB/1) for a given period of time or
more.
• An error command signal is transmitted from the MFP
board/1 (MFPB/1) to printer control board (PRCB).
• An error status signal is transmitted from the printer control
board (PRCB) to MFP board/1 (MFPB/1).
133C Modem abnormalities • Modem on fax board (FAXB) does not work correctly.
13DD Backup data error • The engine counter data and the controller counter data
are inconsistent.
13E2 Engine flash ROM write
error • Flash ROM writing is found faulty during a check.
13E3 Engine flash ROM device
fault • An erase error occurs during erasing of data in flash ROM.
13F0 Engine control failure • An undefined malfunction occurs in the engine section
(PRCB, etc.).
While the machine is operating, if it detects defective condi-
tions, e.g. the next print is not started after the lapse of a
given period of time, it stops operating and the trouble code
is displayed.
14A3 IR lamp malfunction • The intensity of the light emitted from the exposure lamp of
the scanner falls short of the specified value.
3C00 Trouble related to
security • Contact the responsible people of Olivetti when not
returning in power switch OFF/ON.
3C10
3FFF Flash ROM write error • The copier determines that there is an error if writing to the
flash ROM fails during upgrading of the firmware.
• When the power switch is turned ON, the error indicator
lights up steadily and a corresponding message appears
on the display.
• If this error message appears, no operations can then be
performed. It is not possible to upgrade the firmware from a
PC connected through USB connection, either.
4FFF Controller connect error • MFP board/1 (MFPB/1) to MFP board/2 (MFPB/2) connec-
tion failure
C002 RAM error at startup
(standard memory) • RAM error at standard memory is detected during printer
start-up.
C003 RAM error at startup
(expanded memory) • RAM error at expanded memory is detected during printer
start-up.
C013 MAC address error at
startup • Invalid MAC address is detected during printer start-up.
C015 Boot ROM error at startup • Boot ROM error is detected during printer start-up.
C025 Controller ROM error
(Configuration informa-
tion error) • Lead error of destination setting file is detected during the
printer starting.
C026 Controller ROM error
(Access error) • Flash ROM access error is detected during the printer
starting.
Code Description Detection timing
d-Color MF2400