Olivetti PF-P09, Руководство по обслуживанию

Страница: 212 / 457

Field Service Ver. 1.1 May 2011 13. SERVICE MODE
169
ADJUSTMENT
/ SETTING
13.12 FACTORY TEST
• This test is for factory adjustment only and should NOT be used.
13.13 CLEAR DATA
13.13.1 SRAM CLEAR
A. Use
• The following items are cleared (initialization).
Menu mode (Except for [ADMIN. MANAGEMENT]
o
[USER SETTING]
o
[DATE&TIME]
that keeps its setting value):
Only [USER SERVICE MODE] of the user service mode: Set to default.
Only [TX/RX Result] of the Display mode: Clear.
Only [SERVICE'S CHOICE] and [SOFT SWITCH] of the Service mode: Set to default.
B. Procedure
NOTE
• Before executing [SRAM CLEAR], be sure to record the setting values that are to
be initialized through [SRAM CLEAR].
• For the record of the setting values, it is a good idea to have reports and lists
printed.
• Some setting values are not included any of these reports or lists. Be sure to make
a note of them separately.
• After [SRAM CLEAR] has been executed, make necessary entries of data again
based on the setting values recorded.
13.13.2 MEMORY CLEAR
A. Use
• The following items are cleared (initialization).
Only [SERVICE'S CHOICE] and [FIXED ZOOM CHANGE] of the Service mode: Set to
default.
B. Procedure
NOTE
• Before executing [MEMORY CLEAR], be sure to record the setting values that are
to be initialized through [MEMORY CLEAR].
• For the record of the setting values, it is a good idea to have reports and lists
printed.
• Some setting values are not included any of these reports or lists. Be sure to make
a note of them separately.
• After [MEMORY CLEAR] has been executed, make necessary entries of data again
based on the setting values recorded.
Functions/Use
SIGNAL TEST • This test is for factory adjustment only and should NOT be used.
RELAY TEST • This test is for factory adjustment only and should NOT be used.
SENSOR TEST • This test is for factory adjustment only and should NOT be used.
DIAL TEST • This test is for factory adjustment only and should NOT be used.
VOLUME TEST • To check the volume of the speaker.
PANEL BUZZER TEST
• To check the operation of the display and all indicators and buttons.
• When the panel buzzer test are finish, press the panel reset key twice.
RAM TEST • To test reading and writing of the memory.
d-Color MF2400