Olivetti PF-P09, Руководство по обслуживанию

Страница: 191 / 457

13. SERVICE MODE Field Service Ver. 1.1 May 2011
148
ADJUSTMENT
/ SETTING
13.4.19 THICK MODE
A. Use
• In order to prevent toner from clogging within the developer unit as a result of it being
driven at half-speed, select the timing for driving the developer unit at full speed for a
fixed length of time when thick paper is being fed.
QUALITY MODE: While printing on thick paper, printing is periodically paused, and the
developer unit is driven at full speed for a fixed length of time. Since
printing is paused, the quality is not affected; however, a standby time
of approximately 70 seconds occurs every 400 seconds or so of half-
speed operation.
SPEED MODE: While printing on thick paper, only the drive of the developer unit peri-
odically switches to full speed for a fixed length of time.
Since printing continues during full-speed drive, the print quality is
slightly affected, however the standby time is short.
B. Procedure
• The default setting is QUALITY MODE.
“QUALITY MODE” SPEED MODE
13.4.20 FINE LINE ADJ
A. Use
• Adjust how fine lines are reproduced by changing the applied voltage (VC) to the electro-
static roller.
B. Procedure
• The default setting is 0.
-4 to 3
NOTE
• The User Service Mode can also make this setting by selecting [USER SERVICE
MODE]
o
[ADJUST]
o
[FINE LINE ADJ].
However, the adjustable range of the parameter is narrowed to -3 to 2.
13.4.21 IU YIELD SETTINGS
A. Use
• Sets the life detection timing of the imaging unit.
STANDAD: Detect the imaging unit life (prohibition of printing) as the specification
value.
LONG : Change the threshold value of the imaging unit life (prohibition of printing)
detection, and extend the detection timing.
B. Procedure
• The default setting is STANDARD.
“STANDARD” LONG
Standard Long
Life (prohibition of printing) threshold value
(consumption rate)
105 % 150 %
d-Color MF2400