50
S
ECURITY FEATURES
SECURITY FEATURES
The fax machine has security features that make it possible to prevent unauthorised persons from indiscriminately
transmitting documents, making copies or modifying settings. The security features, which are grouped under the
SECURITY menu, include:
•
PROTECTION PROGRAMME: to block access to INSTALLATION and SETUP settings.
•
TRANSMISSION PROTECTION: to prevent unauthorised persons from using the machine to send a telephone
or fax machine.
When this function is enabled, NOT EVEN calls to emergency numbers can be made.
•
COPY PROTECTION: to block the use of the copier function.
•
MAILBOX ACCESS PROTECTION: to prevent unauthorised persons accessing to your confidential mailbox.
•
CREATE MAILBOX: to create a confidential mailbox for your correspondence.
•
BLACK LIST.: to prevent remote parties from communicating with your fax machine. The numbers of these
remote parties must have been saved previously on a “blacklist”.
Security features are activated by means of passwords (max. 4 digits) requested by the fax machine every time an
attempt is made to activate or access certain features or to modify fax machine settings. If the password is not en-
tered correctly, access will be denied.
SETTING PASSWORDS
To change a password that has already been set,
you must access certain functions controlled by it. To
be safe, make a note of any passwords you set.
1.
Make sure that the display shows the initial wait-
ing mode and the date and time.
RX ON FAX 100%
29-10-00 14:42
2.
Press the
key and the “9” key on the nu-
meric keypad.
9.INSTALLATION
/1-9
3.
Press the
key.
TEL.LINE SETUP
4.
Press the
key until the display shows:
SECURITY
5.
Press the
key.
PROGR. ACC.PASSW.
6.
Press the
{ y NH\V WR FKRRVH DQRWKHU VHF
u-
rity feature, then press the
key to con-
firm; otherwise go directly to the next point.
7.
Press the
key.
TYPE PASSWORD
_
8.
Type the password (max. 4 digits) and press the
key to confirm it.
TX ACCESS PASSW.
,
If you wish to set other passwords for one or
more of the other security functions (TX AC-
CESS PASSW., COPY ACC. PASSW. Or
MBX ACCESS PASSW.), repeat steps 6 and
7 for each function, otherwise press the
key to exit from the procedure.