Oliver 4065, Руководство пользователя, Страница: 21 / 88

4065 Table Saw OLIVERMACHINERY.NET
21 |
Page
Additional Items Recommended for Machine Set Up
Item Purpose
Safety glasses and hearing protection Protection
Disposable gloves Protection and cleaning
Lifting Straps Lifting the table saw main unit.
Forklift / Hoist / Crane Lifting the table saw main unit.
Paper Towel Cleaning
WD-40 Cleaning
Rust Inhibitor Cast iron table top rust protection.
Machinist Square / Combination Square / 1-2-3 Block Calibration
45° Machinist Square / Protractor / Quick Square Calibration
Dial Indicator with Miter Slot Compatible Base Calibration
Lifting Table Saw Main Unit from Pallet
Connect the lifting slings to the lifting hooks and ensure
the slings are balanced, then lift the main unit from
overhead.
Lower the table saw gently to the floor to prevent
damaging the casters and the cabinet, then move the main
unit to the designated location for operation.
Cleaning
To prevent rusting during shipment, the unpainted cast
iron surface of the saw is covered with rust protectant and
plastic film. Remove the plastic film and wipe off the rust
protectant with paper towels. Make sure to clean the
hard-to-reach areas, such as the miter tracks and the areas
around the table insert. WD-40 can thin the rust
protectant to make it easier to remove.
Once all rust protectant is removed, routinely coat the
table with rust preventives such as Boeshield® T-9 or paste
wax. Do not use rust preventives that contain silicone,
which is known to interfere with certain finishes and glues.
Excess oil on the saw blade and the fence tube should be
removed as well.