Oliver 4065, Руководство пользователя, Страница: 13 / 88

4065 Table Saw OLIVERMACHINERY.NET
13 |
Page
General Safety Guidelines
1. FAMILIARIZE yourself with all safety instructions found in this manual. Know the limitations and
hazards associated with this machine. Do not operate/service this machine until you are properly
trained.
2. ELECTRICAL GROUNDING , when done properly, reduces the risk of electrocution, shocks, and fire.
Ensure the machine frame is electrically grounded and a ground lead is included in the incoming
electrical service. In cases where a cord and a plug are used, ensure the grounding plug connects to a
suitable ground. Follow the grounding procedure indicated in the electrical code of your area.
3. DISCONNECT the machine from power before performing any service, maintenance, adjustments, or
changing cutters. A machine under repair should be RED TAGGED to show it should not be used until
the maintenance is complete.
4. GUARDS : Keep machine guards in place for all applicable operations. If any guards are removed for
maintenance, DO NOT OPERATE the machine until all guards are reinstalled. Check clearance between
the guards and the cutter before starting the machine.
5.
WORKPLACE SAFETY
: Keep the floor around the machine clean. Scrap material, sawdust, oil, and
other liquids increase the risk of tripping or slipping. Be sure to clean up the table before starting the
machine. Ensure the work area is well-lighted, and a proper exhaust system is used to minimize dust.
Use anti-skid floor strips on the area where the operator normally stands and mark off the machine
work area. Provide adequate workspace around the machine.
6. ACCESS CONTROL should be enforced so only trained personnel can access the work area and operate
the machine. Make use of the childproof safety feature of the power switch when available.
7.
NEVER STAND ON THE MACHINE.
This prevents injuries from tipping-related accidents and accidental
contact with cutters.
8. REPLACEMENT PARTS: Use only genuine Oliver Machinery replacement parts and accessories
recommended for this machine. Generic parts made by other manufacturers may create a safety
hazard and WILL void the factory warranty and other guarantees.
9. ADDITIONAL SAFETY INFORMATION:
•
National Safety Council – Accident Prevention Manual for Business and Industry:
https://shop.nsc.org/apm-admin-program-14ed
• ANSI 01.1: https://webstore.ansi.org/standards/wmma/ansio12013
• OSHA 1910.213: https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.213
*** ATTENTION ***
Table saw specific safety guidelines are located in the section “Operation” (page 34). Familiarize
yourself with all safety guidelines before using this saw!