OHAUS T72XW AM, Инструкция по эксплуатации

Страница: 96 / 143

EN 88 7000 SERIES INDICATORS
3. When a no-motion condition is detected, the display will prompt ID?.
4. Enter the alphanumeric identification (ID) for this vehicle. The ID can also be recalled by viewing the records
in the Permanent ID Table and pressing ENTER when the desired record is displayed. When the ID entry is
complete, press ENTER.
5. If enabled in setup, the indicator will prompt for the variable entry. If so prompted, enter the variable
transaction data using the alphanumeric keys and press ENTER when complete. The variable is a descriptive,
printable field which is related to this specific vehicle or vehicle load.
6. The indicator will recall the stored weight from the Permanent ID Table and display it at the top of the display
as M = xxxxx. The display will change to the net mode. The stored weight must be less than the live scale
weight or an error Tare value greater than live weight. will be displayed.
7. The ID, weight and variable information for the transaction is now displayed for confirmation. If the data is
correct, press PRINT to generate the outbound transaction. If any of the data is not accurate, press the
CLEAR key to clear all data and return to the ID? prompt.
8. An outbound print is triggered and if enabled in setup, the net weight will be added to the totals for the
Permanent ID.
Duplicate print capability is not available if the live weight on the scale deviates from the printed transaction weight
by more than 50 divisions.
9. The display returns to its initial state after the duplicate ticket is printed, or when the weight changes more
than 50 display divisions.
Inbound Transaction (Stored Tare of 00)
An inbound transaction for a Permanent Tare is only possible if the original ID record was created in setup with a
tare value of
“00”. In this case, the vehicle must initially pass across the scale two times so the true tare weight can
be stored to the table.
1.
The display will show Add weight > xxxx (i.e,. greater than xxxx) where xxxx is the threshold value entered in
setup.
2. A vehicle with a previously stored tare weight o
f “00” pulls onto the scale and the weight exceeds the
threshold value.
3. When a no-motion condition is detected, the display will prompt ID?.
4. Enter the alphanumeric identification (ID) for this vehicle. The ID can also be recalled by viewing the records
in the Permanent ID Table and pressing ENTER when the desired record is displayed. When the ID entry is
complete, press ENTER.
5. The ID, weight and variable information for the inbound transaction is now displayed for confirmation. If the
data is correct, press PRINT to generate the inbound transaction. If any of the data is not accurate, press the
CLEAR key to clear all data and return to the ID? prompt.
6.
The actual vehicle weight now replaces the original “00” value in the Permanent ID Table and an inbound print
is triggered. The Inbound transaction stays on screen for a duplicate print, if required.
Duplicate print capability is not available if the live weight on the scale deviates from the printed transaction weight
by more than 50 divisions.
7.
The display returns to its initial state after the duplicate ticket is printed, or when the weight changes more
than 50 display divisions.
8. When this ID is processed the second time, if the initially stored weight was the gross weight, that stored
weight will be replaced with the lower tare value.
After this, outbound transactions can be repeatedly performed in a one-pass process.
Viewing/Recalling a Permanent Tare Record
Instead of manually entering the ID for the outbound transaction, the ID can be recalled from the Permanent ID
Table.
1.
When the display is prompting for ID?, press the MENU key .
2. Focus should be on the Permanent ID Table icon . If not, move the focus to that icon.
3. Press ENTER to view the first record in the table.
4. Use the UP and DOWN arrow keys to view all the records in the table.
5. When the desired record is displayed, press the ENTER key to recall that record.
6. The stored weight and variable (if used) will be recalled to the screen and the display will show the resulting
net weight.
7. Complete the transaction by pressing PRINT.
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com