OHAUS T72XW AM Скачать руководство пользователя страница 122

Страница: 122 / 143

EN 114

7000 SERIES INDICATORS

– SEND STABLE WEIGHT VALUE

Command:

Response:

S_S_ _ _ _ _ 436.2_lb

436.2 stable displayed weight
lb

weight unit

Response:

S_I

Command understood, not executable at present.

Response:

S_+

Indicator in overload range.

Response:

S_-

Indicator in underload range.

Comments

The indicator

will wait for up to 3 seconds after receiving an “S” command for no-motion. If motion does not settle

within this time, the command is aborted and the S_I response is sent.

– SEND WEIGHT VALUE IMMEDIATELY

Command:

Response:

S_S_ _ _ _ _ 436.2_lb Stable weight value.

Response:

S_D_ _ _ _ _ 436.2_lb Non-stable (dynamic) weight value.

Response:

S_I

Command understood, not executable at present.

Response:

S_+

Indicator in overload range.

Response:

S_-

Indicator in underload range.

Comments

The response to the command SI is the last internal weight value (stable or dynamic) before receipt of the “SI”
command.

SIR

– SEND WEIGHT VALUE IMMEDIATELY AND REPEAT

Command:

SIR

Response:

S_S_ _ _ _ _ 436.2_lb Stable weight value.

Response:

S_D_ _ _ _ _ 436.2_lb Non-stable (dynamic) weight value.

Response:

S_I

Command understood, not executable at present.

Response:

S_+

Indicator in overload range.

Response:

S_-

Indicator in underload range

Example
Command:

SIR

Response:

S_D_ _ _ _ _ 129.07_kg
S_D_ _ _ _ _ 129.09_kg

S_S_ _ _ _ _ 129.09_kg
S_S_ _ _ _ _ 129.09_kg
S_D_ _ _ _ _ 114.87_kg
. . . The scale continues to send stable or dynamic weight values

Comments

The SIR command is overwritten and cancelled by the commands S, SI, SR, and @.
The data output rate is approximately 4 per second.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание T72XW AM
















































































































































Результаты поиска

Содержание T72XW AM

Отзывы:

Бренды по названию

Популярные бренды

OHAUS T72XW AM, Инструкция по эксплуатации

Результаты поиска

Содержание T72XW AM

Отзывы:

Бренды по названию

Популярные бренды